View HMC699LP5E_7801974.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 24 general description features functional diagram typical applications 7 ghz integer n synthesizer (n = 56 - 519) hmc699lp5 / 699lp5e v02.0908 the hmc699lp5(e) is a frequency synthesizer with a wideband reversible polarity digital pfd and lock detect output. the divider operates unconditionally from 160 - 7000 mhz with a continuous integer division ratio of 56 to 519. the hmc699lp5(e) high frequency operation along with ultra low phase noise fl oor make possible synthesizers with wide loop bandwidth and low n resulting in fast settling and very low phase noise. when used in conjunction with a differential loop fi lter, the hmc699lp5(e) can be used to phase lock a vco to a reference oscillator. ultra low ssb phase noise floor: -153 dbc/hz @ 10 khz offset @ 100 mhz reference frequency. programmable divider (n= 56 - 519) operating up to 7 ghz open collector output buffer amplifi ers for interfacing w/ op-amp based loop filter reversible polarity pfd w/ lock detect output 32 lead 5x5mm smt package: 25mm 2 electrical specifi cations, t a = +25 c, vcc = vcc1 = vcc2 = vcc3 = vcc_pd = 5v the hmc699lp5(e) is ideal for: ? satellite communication systems ? point-to-point radios ? military applications ? sonet clock generation parameter conditions min. typ. max. units maximum ref. input frequency sine or square wave input [1] 1300 mhz minimum ref. input frequency square wave input [2] 10 mhz reference input power range 100 mhz frequency -5 +5 dbm maximum vco input frequency 7000 mhz minimum vco input frequency sine wave input 160 mhz vco input power range 100 mhz input frequency -10 +5 dbm pfd output voltage 2000 mv, pk - pk pfd gain gain = vpp / 2 rad. 0.32 v/rad. ssb phase noise @ 10 khz offset @ 100 mhz square wave ref. input pin= 0 dbm -153 dbc/hz total supply current 345 ma [1] maximum frequencies may be limited by available counter division ratio. [2] square wave input achieves best phase noise at lower ref. frequency (see sine & square wave comparison plots)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 25 hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519) [1] phase noise floor vs offset frequency with varying ref power level [2] fin= 7000 mhz @ 0 dbm, ref frequency = 100 mhz, n = 70 phase noise floor [1][2] ref = sine wave, vcc = 4.75v phase noise floor [1][2] ref = sine wave, vcc = 5v phase noise floor [1][2] ref = square wave, vcc = 4.75v phase noise floor [1][2] ref = square wave, vcc = 5v phase noise floor [1][2] ref = sine wave, vcc = 5.25v phase noise floor [1][2] ref = square wave, vcc = 5.25v -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 26 typical dc characteristics @ vcc = +5v symbol characteristics +25c units min. typ. max. icc power supply current 310 345 380 ma voh output high voltage, (nu, nd) 555v vol output low voltage, (nu, nd) 2.9 3.0 3.1 v absolute maximum ratings rf input (vcc = +5v) +10 dbm supply voltage (vcc) +5.5v logic inputs -0.5v to (0.5v + vcc) channel temperature (tc) 135 c continuous pdiss (t = 85 c) (derate 87 mw/ c above 85 c) 4.3 w thermal resistance (junction to ground paddle) 11.60 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c typical supply current vs. vcc vcc (vdc) icc (ma) 4.75 318 5.00 345 5.25 369 note: hmc669lp5(e) will work over full voltage range above. electrostatic sensitive device observe handling precautions hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519) [1] phase noise floor vs offset frequency over temperature [2] fin= 7000 mhz @ 0 dbm, ref frequency = 100 mhz, n = 70 phase noise floor vs offset frequency with varying fin @ 0 dbm, ref = 100 mhz square wave @ 5 dbm, vcc = 5v phase noise floor [1][2] square wave @ 5 dbm, vcc = 5v phase noise floor [1][2] sine wave @ 5 dbm, vcc = 5v -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 +25 c +85 c -40 c ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 +25 c +85 c -40 c ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 1600 mhz 7000 mhz ssb phase noise (dbc/hz) offset frequency (hz)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 27 hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519) outline drawing part number package body material lead finish msl rating package marking [3] hmc699lp5 low stress injection molded plastic sn/pb solder msl1 [1] h699 xxxx hmc699lp5(e) rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h699 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters]. 3. lead spacing tolerance is non-cumulative 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested pcb land pattern.
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 28 pin description pin number function description interface schematic 1ld pulsed output. average low = unlocked. average high = locked 2inv pfd invert function cmos compatible input control bit logic low = normal logic high = invert 4, 5, 18, 25 vcc1, vcc3, vcc2, vcc_pd supply voltage 5v 0.25v 9 - 14 n0 - n5 cmos compatible control input bit 0 (lsb) - 5 15 fin (these pins are ac coupled and must be dc blocked externally.) frequency input frequency input compliment 16 nfin 22, 23 s1, s0 cmos compatible control input bit 0 (lsb) -1 hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 29 hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519) pin number function description interface schematic 28 ref reference input reference input compliment (these pins are ac coupled and must be dc blocked externally.) 27 nref 30 nd down output 31 nu up output pin description (continued)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 30 hmc699lp5(e) programming truth table division ratio n n counter n counter decimal set swallow s counter swallow s decimal set (lsb) n0 n1 n2 n3 n4 n5 (lsb) s0 s1 s2 56 7 6 0 0 011000000 57 7 6 1 1 011000100 58 7 6 2 2 011000010 59 7 6 3 3 011000110 60 7 6 4 4 011000001 61 7 6 5 5 011000001 62 7 6 6 6 011000011 63 7 6 7 7 011000111 64 8 7 0 0 111000000 65 8 7 1 1 111000100 66 8 7 2 2 111000010 67 8 7 3 3 111000110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512 64 63 0 0 111111000 513 64 63 1 1 111111100 514 64 63 2 2 111111010 515 64 63 3 3 111111110 516 64 63 4 4 111111001 517 64 63 5 5 111111101 518 64 63 6 6 111111011 519 64 63 7 7 111111111 n = int (n/p) s = mod (n/p) where: n = desired division ratio p = prescaler value = 8 n = counter n value (counter decimal set is n - 1) hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 31 * choose values of r2 & r4 between 4.3 and 20 ohms for best noise performance. hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519) hmc699lp5(e) programming truth table, non-continuous division ratios division ratio n n counter n counter decimal set swallow s counter swallow s decimal set (lsb) n0 n1 n2 n3 n4 n5 (lsb) s0 s1 s2 16 2 1 0 0 100000000 17 2 1 1 1 100000100 18 2 1 2 2 100000010 24 3 2 0 0 010000000 25 3 2 1 1 010000100 26 3 2 2 2 010000010 27 3 2 3 3 010000110 32 4 3 0 0 110000000 33 4 3 1 1 110000100 34 4 3 2 2 110000010 35 4 3 3 3 110000110 36 4 3 4 4 110000001 40 5 4 0 0 001000000 41 5 4 1 1 001000100 42 5 4 2 2 001000010 43 5 4 3 3 001000110 44 5 4 4 4 001000001 45 5 4 5 5 001000101 48 6 5 0 0 101000000 49 6 5 1 1 101000100 50 6 5 2 2 101000010 51 6 5 3 3 101000110 52 6 5 4 4 101000001 53 6 5 5 5 101000101 54 6 5 6 6 101000011 n = int (n/p) s = mod (n/p) where: n = desired division ratio p = prescaler value = 8 n = counter n value (counter decimal set is n - 1)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 32 hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519) evaluation pcb circuit
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 33 hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519) evaluation pcb list of materials for evaluation pcb 116108 [1] item description j1 - j4 pc mount sma rf cometor j5 - j6 2mm dc heuter c1 - c5, c8 - c10 1000 pf capacitor, 0402 pkg c6 - c7 100 pf capacitor, 0402 pkg c15 1000 pf capacitor, 0603 pkg c16 4.7 f tantalum capacitor case a d led green, 0603 pkg r1 10k ohm, resistor, array r8, r9, r10 10k ohm, resistor, 0402 pkg. r11 1k ohm, resistor, 0402 pkg. r12 100 ohm, resistor, 0402 pkg. u1 hmc699lp5(e) synthesizer pcb [2] 116106 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the fi nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. note: the evaluation pcb for the hmc699lp5 contains 10k ohm pull up resistors for each of the control inputs n0 through n5 and s0 through s2. programming the 489 dis- tinct division ratios consists of installing or removing jumpers n0 through n5 and s0, s1. note: 0 = jumper installed. 1 = jumper not installed. evaluation pcb truth table (see programming truth table)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 34 typical pll application circuit using hmc699lp5 pll application shown for a 13 ghz fout. contact hmc to discuss your specifi c application. hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519)
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pll - integer-n synthesizer - smt 11 11 - 35 hmc699lp5 / 699lp5e v02.0908 7 ghz integer n synthesizer (n = 56 - 519) cmos/ttl input characteristics maximum input logic 0 voltage (v il maximum ) = 1.1v @ 1 a. minimum input logic 1 voltage (v ih minimum ) = 1.8v @ 50 a. input iv characteristics for the logic inputs (n0 - n5 and s0 - s2) are shown below: -0.1 0 0.1 0.2 0.3 0.4 012345 input current (ma) input voltage (v) v il max v ih min typical application showing spurious performance

▲Up To Search▲

Price & Availability of HMC699LP5E

	To Download HMC699LP5E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .